"One Perfect Part at a Time"

CNC Gun Part

A local person here in Frisco asked if I could duplicate this part (the black one). I don’t usually like to take on outside projects as I have enough of my own. This part looked interesting. It is part of a tripod bracket for an expensive, but what the owner called a “toy” gun. Actually is is a very sophisticated collector item.

As can be seen in the photo the bracket had the tab broken off. It is a very nice injection molded aluminum casting but the crystallization left it vulnerable to breaking where it did.

I was going to make a duplicate by manual milling. That’s the rotary table setup in an earlier post. I changed my mind and decided to do it with CNC milling.

I had to first very carefully measure the part in every detail then make a 3D drawing in Rhinoceros (Rhino) You can see the screen capture and a couple of output pictures.

I converted the drawing to two G-Code files with RhinoCAD, one for top and one for bottom.

I did a test run in oak then made the one in aluminum. I used my Taig CNC mill running mist cooling. Overall size of the part is rather small, about 1.5″ x 1.5″ x 3/8″

I’m not setup for doing anodizing and I have never done any. I have studied the process and it can be done in the home shop. The new part really needs to be anodized like the original, but that is not my “thing” right now. That’s all I need is another skill to master. 🙂

Categories
NOTE: Log in is for admin and members only, not required to post comments.