"One Perfect Part at a Time"

More HB2PS2

Click on pictures for a large view.

I got a lot of work done on the PS2 Power Supply / Controller this week end. Slight layout change form the first picture a few days ago. I turned the transformer around and put the full bridge diodes on the other side. There was too much going on around the capacitor

I fired it up and got some DC voltage readings (see picture). The transformer is 10 Amps at 24 volts A/C. With full wave rectification and the capacitor it charges up to peak voltage DC. I haven’t powered the board yet as I need a 10 amp fuse. Otherwise it is ready to go.

Categories
NOTE: Log in is for admin and members only, not required to post comments.