The Autodesk Fusion 360 seems to be suffering an identity crisis. It is acting like it no longer wants to be the choice of hobbyists. Fusion 360 is abandoning its “Hobbyist” license and is calling what remains a “One Year Personal Use” license. No indication that can be renewed on a year-to-year basis.
To me this “Cool Hand Luke” failure to communicate is a flashing beacon in the fog. “You hobbyists can play another year, but after that you better “pony-up” for one of our revenue stream licenses,” Is the message I read.
Could be they discovered too many “professional” users claiming hobbyist status.
That is not a problem for me to solve.
I must decide what is best for the 3D CAD drawing that I do. I have many other paid-up options. That means I already own them. Rhino 6 and Vectric Aspire to name the two main ones. I also own Pixologic Z-Brush which is not exactly a CAD but does produce quality 3D drawings and models.
I love working with Fusion 360. It is the more commercial Machine Tool CAD and has the built-in CAM for machine tool operations. Of course, it does far more than just machine part drawing.
I have decided to wait and see what Autodesk has done to F360 for the “Personal Use” license. It has been dumbed down and the number of “Open Projects” has been limited to ten. What that actually means is yet to be revealed. I never work with many “open projects”. I work on one at a time.
If it means I must store closed projects on my computer rather than accessible in their cloud server, that is perfectly fine with me. That is my preference and always has been. I do not need a cloud server to… Continue reading
Perhaps not worthy of a VMC but wax milling is a good job for a mill like the Taig. That implies the Taig is an excellent machine for the job.
As shown elsewhere in this blog, I have converted the standard Taig (not ball-screw) to a water-cooled spindle capable of 25,000 rpm.
The spindle is overpowered for wax milling. It just loafs along at near idle power. I turned off the water flow and let the mill run for an hour without water flow. The spindle became warm, but no where near hot. A lot cooler than the Taig standard CNC spindle motor doing the same work.
I have said wax milling is very low load, so this doesn’t surprise me. It tells me my cooling system is certainly far over engineered. Water flow is slow enough that wastewater (down the drain) cooling is certainly feasible for short to perhaps medium milling. The flow rate needs to be the smallest trickle. I would suggest collecting the (clean) water for plant watering or other uses.Continue reading
A video of my Taig mill with HS water cooled spindle running at 15,000 RPM milling wax double sided master for lost wax casting. Sorry about vertical format. I know better but filmed this originally for quick share with a friend on iPhone Messenger. Right click on image and open in new window for larger size and audio.
Note well: It called a ROUTER not micro-mill. Or any type of mill. Routers and mills are cousins, but don’t live in the same family group.
I was extremely excited when I saw this tool for the first time. I like Tormach equipment and I especially like their Linux based PathPilot controller software. This little baby OH router, the Tormach xsTECH actually runs full strength PathPilot!
It’s also a complete, full house, tools and all, everything one needs to get up and running — 3-axis micro overhead router. WOW! Continue reading
The fourth dimension is often mentioned in science fiction as a dimension beyond the human senses. Today, real scientists (if there are such people) claim the fourth dimension does exist. But there are IMHO plenty of pseudoscience, especially promoted as video “entertainment.” Material for a future rant…
In machining there really IS a fourth dimension. Usually called the 4thaxis. The Hobbyist Machine Shop (THMS) has a fourth axis for use on the Taig micro mill. It’s been on both the mill used for metal machining as well as the wax milling machine. Currently it is on the Taig micro-mill used for wax carving
THMS has (owns) four software CAM software packages that can create g-code for the 4thaxis machining. I’ll list them but will not (here) get into the fine details of using them.
Two types of 4thaxis operations are most common.
First is indexing. The material to be machined is held in the 4thaxis rotational device. Standard X, Y, Z three axis machining is performed on the surface facing the Z axis. 3 axis machining is paused, and Z axis is raised to clear all dimensions of the material. The 4thaxis rotates (indexes) the material to another face. This can be 180, or 90, or 45, or any equal or non-equal rotation. Then 3 axis machining operation resumes on the new surface plain presented. Repeat as necessary.
The second process (A axis rotation) requires setting Z axis Y position perpendicular to the center rotational axis and A axis assumes the movements of the Y motion vectors by rotating. Where A axis was stationary in the first method, the actual Y axis is stationary in the second.… Continue reading