{"id":884,"date":"2009-07-20T21:23:58","date_gmt":"2009-07-21T02:23:58","guid":{"rendered":"http:\/\/thmsblog.tedatum.com\/?p=884"},"modified":"2009-08-17T06:48:53","modified_gmt":"2009-08-17T11:48:53","slug":"be-an-angel","status":"publish","type":"post","link":"https:\/\/blog.thehobbyistmachineshop.com\/?p=884","title":{"rendered":"Be an Angel"},"content":{"rendered":"ngg_shortcode_0_placeholder\n<p>Cherub is more accurate. I made this on the HB2 Sunday. I was of course running the Taig spindle. The roughing and the finish were both done with a 1\/8 (0.125) inch ball end mill. The total run time was 1 hour and 35 minutes at 50 IPM. 10,600 RPM.<\/p>\n<p>The spindle is now just slightly warm after that kind of run. The spindle break in\u00a0has about 5 hours of run time. The motor was HOT but that is normal for the motor and that run time. Taig rates it as a continuous duty motor so heat is not a problem.<\/p>\n<p>Another note:<\/p>\n<p>The Sieg X3 mill motor controller has been replaced (lightning damage) and the machine is back into operation! Yea!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>\u00a0 Cherub is more accurate. I made this on the HB2 Sunday. I was of course running the Taig spindle. The roughing and the finish were both done with a 1\/8 (0.125) inch ball end mill. The total run time was 1 hour and 35 minutes at 50 IPM. 10,600 RPM. The spindle is now [&hellip;]<\/p>\n","protected":false},"author":77778,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"ngg_post_thumbnail":0,"footnotes":""},"categories":[34],"tags":[13,138,21,33],"class_list":["post-884","post","type-post","status-publish","format-standard","hentry","category-wood-carving","tag-carving","tag-cnc","tag-hobby","tag-wood"],"_links":{"self":[{"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=\/wp\/v2\/posts\/884","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=\/wp\/v2\/users\/77778"}],"replies":[{"embeddable":true,"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=884"}],"version-history":[{"count":0,"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=\/wp\/v2\/posts\/884\/revisions"}],"wp:attachment":[{"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=884"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=884"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blog.thehobbyistmachineshop.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=884"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}