Milling Wax Adventure

[Show as slideshow]

The year is running out fast. I will soon have to say good-bye to 2011. This is the year (last Saturday actually) that I became 65 years old. Time enough for pondering that event, now to keep moving. Ha!

I did some machining of wax on the Taig CNC mill Saturday. I love machining wax (the hard blue kind). The wax is not good for creating real finished useful items but it makes excellent models for making molds and doing casting.

I spent the morning doing the design work in VECTRIC Aspire software. I was creating a Christmas ornament as a negative. I learned how to mirror and reverse the lettering and other “thinking inside out” processes in 3D design.

The afternoon was spent machining the design into the wax, using the Taig CNC mill. That was an adventure.

I haven’t run that machine for some time. The milling started out OK, but I got a couple of stalls and lost steps in the Z axis. The mill has never done that before so it was a surprise. I wasn’t pushing rapid travel or cutting speeds that hard either. Lifting the spindle and motor is fairly hard work.

The rapids are only set at 65 IPM and I was running about a third of that. So I ran through the software set-up and MACH3 warned me I was pushing the limit on pulses for the pulse generation frequency for which I had MACH 3 set. The Taig has twenty TPI screws so it takes a lot of very short pulses with 1/8th stepping (32,000 per inch) to get any speed from the drives.

That’s 32,000 per inch so at 60 IPM travel (keeping the math simple) that’s 1 inch per second requiring 32,000 Hz (32 kHz)… Continue reading →