"One Perfect Part at a Time"

Taig CNC Ready For Action

I have the Taig CNC mill in place and firmly mounted.

Taig CNC mounted

The mill is now bolted to the bench with three 1/4-20 x 1.5 in. SS bolts (SS to prevent rusting). That is a commercial “bun” pan under the mill. Overall dimensions of the pan are 18×26. I don’t expect the pan to get all the swarf but it will help contain some of the oil and mist coolant when used.

I found what I call “panduit” in a very small size. I mounted it on the back wall to help heep the CNC motor leads up out of the pan. It sure “neaten-uped” the jumble of cable leads.

I am what I considered stage 1 of the Micro CNC install. It is fully operational and I will be using it for cnc projects. Stage 2 will be adding home switchs and end switches. I have some micro switches but I need to design an enclosure for them. Later

NOTE: Log in is for admin and members only, not required to post comments.